This site uses cookies to provide you with a better experience. By clicking on "Accept" all categories of cookies will be activated. To decide which ones to accept, click on "Customize" instead. For more information you can consult the page *** Cookie policy.

CustomizeAccept
CLOSE
  • Close
Product Categories

46 results found (25 per page - 2 in total)

1 2  
Seeger ring 006615 for 15 mm piston pin on compatible Vespas. Check the groove shape before replacing a wire retainer.

Seeger ring 006615 for 15 mm piston pin on compatible Vespas. Check the groove shape before replacing a wire retainer.

Item code:
11491
Unit of measurement:
PZ

15 mm piston pin retainer for Vespa. Seeger ring with reference 006615, designed to retain the 15 mm piston pin in the piston. The [...]

  • Price: 

    € 0,87 Discount 6.2%

    €0,82 All prices are inclusive of VAT

Original Piaggio bushing 174514, 14,5×13×16,4 mm, for the multiple gear pin of compatible Vespa PX, T5 and Cosa.

Original Piaggio bushing 174514, 14,5×13×16,4 mm, for the multiple gear pin of compatible Vespa PX, T5 and Cosa.

Item code:
8564
Unit of measurement:
PZ

Introduction: The original Piaggio bushing 174514 fits in the crankcase housing that supports the gearbox multiple gear pin. The dimensions [...]

  • Price: 

    € 10,05 Discount 6.2%

    €9,43 All prices are inclusive of VAT

M6x25 hex bolt with flat washer and 6 mm Grower for clutch cover Vespa PX 125-200, Rally and TS.

M6x25 hex bolt with flat washer and 6 mm Grower for clutch cover Vespa PX 125-200, Rally and TS.

Item code:
10129
Unit of measurement:
PZ

M6x25 bolt with washers for Vespa clutch cover. Small parts kit for securing the clutch cover on Vespa Largeframe engines [...]

  • Price: 

    € 0,44 Discount 4.8%

    €0,41 All prices are inclusive of VAT

M10 bolt for engine support crossmember for Vespa 50, Primavera and ET3. Compare the length and thread of the removed pin to the replacement part.

M10 bolt for engine support crossmember for Vespa 50, Primavera and ET3. Compare the length and thread of the removed pin to the replacement part.

Item code:
0510
Unit of measurement:
PZ

M10 bolt for Vespa smallframe engine mount. Bolt for the crossmember that secures the engine to the frame on compatible smallframe Vespas. [...]

  • Price: 

    € 6,17 Discount 5.9%

    €5,81 All prices are inclusive of VAT

M14x1,5 240mm engine support crossmember bolt for Vespa Largeframe. Piaggio reference 081803; check equipment.

M14x1,5 240mm engine support crossmember bolt for Vespa Largeframe. Piaggio reference 081803; check equipment.

Item code:
0541
Unit of measurement:
PZ

Engine support cross member bolt for Vespa Largeframe. M14x1,5 through bolt with a nominal length of 240 mm, intended for connecting the engine block [...]

  • Price: 

    € 12,81 Discount 5%

    €12,18 All prices are inclusive of VAT

Dayco CVT7123 15x621 mm timing belt for Vespa PK 50 XL Automatic and Plurimatic compatible. GTIN 8021787568004, reference 236102.

Dayco CVT7123 15x621 mm timing belt for Vespa PK 50 XL Automatic and Plurimatic compatible. GTIN 8021787568004, reference 236102.

Item code:
9553
Unit of measurement:
PZ

Dayco Belt for Vespa PK 50 Automatic and Plurimatic Dayco Power CVT drive belt for the variator of Vespa PK 50 XL automatic [...]

  • Price: 

    € 17,43 Discount 5%

    €16,57 All prices are inclusive of VAT

Pair of engine support bolts OEM-Qualität 7673472 M12x42 mm, wrench 17, for Vespa VN, VM, VL, VB1 and GS 150 Wideframe.

Pair of engine support bolts OEM-Qualität 7673472 M12x42 mm, wrench 17, for Vespa VN, VM, VL, VB1 and GS 150 Wideframe.

Item code:
4695
Unit of measurement:
PZ

The OEM-Quality 7673472 set includes two bolts for securing the engine to the frame of compatible Wideframe Vespas. Each element has [...]

  • Price: 

    €17,47 All prices are inclusive of VAT

INA 16530300 needle bearing, size 13×12×9 mm and Piaggio reference 165303, for lower clutch lever of compatible Vespas.

INA 16530300 needle bearing, size 13×12×9 mm and Piaggio reference 165303, for lower clutch lever of compatible Vespas.

Item code:
9165
Unit of measurement:
PZ

INA roller bearing for lower clutch lever. Roller bearing intended for the lower clutch lever support in Vespa engine covers. [...]

  • Price: 

    € 7,08 Discount 0.9%

    €7,02 All prices are inclusive of VAT

M5 threaded plate nut for sheet metal fastening on Vespa 50, Primavera, ET3, PK, PX and T5. Compare shape before assembly.

M5 threaded plate nut for sheet metal fastening on Vespa 50, Primavera, ET3, PK, PX and T5. Compare shape before assembly.

Item code:
16016
Unit of measurement:
PZ

M5 plate nut for Vespa. A fastener that can be applied to the edge of a sheet metal to obtain an M5 thread without welding a nut. The [...]

  • Price: 

    € 1,32 Discount 5.9%

    €1,24 All prices are inclusive of VAT

Flywheel fixing nut M11x1,5 for Vespa with 17 mm cone shaft. Suitable for VNB, Super and Sprint versions with corresponding thread.

Flywheel fixing nut M11x1,5 for Vespa with 17 mm cone shaft. Suitable for VNB, Super and Sprint versions with corresponding thread.

Item code:
8800
Unit of measurement:
PZ

M11 flywheel nut for Vespa 17mm cone Flywheel tightening nut for Vespa crankshafts with 17mm cone and M11x1,5 thread. This size is used [...]

  • Price: 

    € 3,76 Discount 5.9%

    €3,54 All prices are inclusive of VAT

M6x1 square nut with sheet metal cage for fixing the brake pedal on compatible Vespa 50-125, Primavera, ET3, PK, PX and T5.

M6x1 square nut with sheet metal cage for fixing the brake pedal on compatible Vespa 50-125, Primavera, ET3, PK, PX and T5.

Item code:
4819
Unit of measurement:
PZ

M6 cage nut for Vespa brake pedal. Square nut with M6x1 thread held in place by a sheet metal cage. The cage attaches to the edge of the [...]

  • Price: 

    € 2,35 Discount 5.7%

    €2,22 All prices are inclusive of VAT

BGM PRO BGM2250 flywheel nut in 42CrMo4 steel, M12x1,50 thread, 33 mm collar and 17 mm wrench for Vespa GS 160, SS 180 and Rally.

BGM PRO BGM2250 flywheel nut in 42CrMo4 steel, M12x1,50 thread, 33 mm collar and 17 mm wrench for Vespa GS 160, SS 180 and Rally.

Item code:
12365
Unit of measurement:
PZ

BGM PRO high-strength flywheel nut. Flanged nut for securing the flywheel on compatible Vespa GS, SS, and Rally models. The steel construction [...]

  • Price: 

    € 10,15 Discount 3.1%

    €9,83 All prices are inclusive of VAT

BGM PRO BGM2253 high-strength flywheel nut, M10×1,50, Ø24 mm flange and 6 mm height. For V50, V90, SS50/90 and Primavera within the indicated series.

BGM PRO BGM2253 high-strength flywheel nut, M10×1,50, Ø24 mm flange and 6 mm height. For V50, V90, SS50/90 and Primavera within the indicated series.

Item code:
12366
Unit of measurement:
PZ

The BGM PRO BGM2253 flywheel nut is a high-strength component for Vespa Smallframe crankshafts with an M10 1,50 thread. The integrated flange measures [...]

  • Price: 

    € 7,08 Discount 3.3%

    €6,84 All prices are inclusive of VAT

CIF 5039 flywheel nut with M12x1,25 thread and 19 mm wrench for Vespa PX, T5, Cosa, PK and compatible Piaggio Ape. GTIN 4057237564306.

CIF 5039 flywheel nut with M12x1,25 thread and 19 mm wrench for Vespa PX, T5, Cosa, PK and compatible Piaggio Ape. GTIN 4057237564306.

Item code:
9735
Unit of measurement:
PZ

CIF M12x1,25 Flywheel Nut The CIF 5039 nut secures the flywheel to crankshafts with M12x1,25 fine threads. The 19 mm hex allows for [...]

  • Price: 

    € 1,03 Discount 6.3%

    €0,96 All prices are inclusive of VAT

Flywheel nut CIF 5187, M10×1,5 thread, 14 mm wrench and 24,2 mm flange for compatible Vespa 50, 90, Primavera, ET3 and PK.

Flywheel nut CIF 5187, M10×1,5 thread, 14 mm wrench and 24,2 mm flange for compatible Vespa 50, 90, Primavera, ET3 and PK.

Item code:
8799
Unit of measurement:
PZ

CIF M10-1,5 flywheel nut. Flanged nut for securing the flywheel to the crankshaft. It has an M10-1,5 thread, a 14 mm hex key, and a height of [...]

  • Price: 

    € 3,67 Discount 5.9%

    €3,45 All prices are inclusive of VAT

SIP 87273000 flanged flywheel nut M12x1,5, diameter 33,4 mm and 17 mm wrench, for Vespa GS 160, SS 180 and compatible Rally.

SIP 87273000 flanged flywheel nut M12x1,5, diameter 33,4 mm and 17 mm wrench, for Vespa GS 160, SS 180 and compatible Rally.

Item code:
6602
Unit of measurement:
PZ

M12x1,5 flanged flywheel nut for Vespa Largeframe. SIP 87273000 nut for securing the flywheel to compatible engines. It has an M12x1,5 thread, flange [...]

  • Price: 

    € 4,40 Discount 6.1%

    €4,14 All prices are inclusive of VAT

BGM PRO BGM1770C Type C piston pin retainers: Ø15 mm, 1,00 mm thread, pack of 2. Check piston groove and size before assembly.

BGM PRO BGM1770C Type C piston pin retainers: Ø15 mm, 1,00 mm thread, pack of 2. Check piston groove and size before assembly.

Item code:
11350
Unit of measurement:
PZ

Introduction: BGM PRO BGM1770C is a pair of C-type snap rings designed for lateral locking of the piston pin. The verified size is [...]

  • Price: 

    €3,11 All prices are inclusive of VAT

Malossi 36 4452 C-type piston pin retainer, Ø 16x1,2 mm, supplied in one piece. For pistons and cylinder kits designed for this reference.

Malossi 36 4452 C-type piston pin retainer, Ø 16x1,2 mm, supplied in one piece. For pistons and cylinder kits designed for this reference.

Item code:
16018
Unit of measurement:
PZ

Malossi 16x1,2 mm C-shaped piston pin retainer. Malossi 36 4452 elastic retainer with a C-profile, 16 mm nominal diameter and 1,2 mm cross-section. It laterally retains [...]

  • Price: 

    € 0,37 Discount 20%

    €0,29 All prices are inclusive of VAT

Piaggio 66120000 piston pin retainer, Ø12x1 mm, Seeger type with eyelets for compatible original Vespa pistons. Check the groove cross-section.

Piaggio 66120000 piston pin retainer, Ø12x1 mm, Seeger type with eyelets for compatible original Vespa pistons. Check the groove cross-section.

Item code:
10540
Unit of measurement:
PZ

Piaggio 12x1 mm piston pin retainer. Safety ring designed to retain the piston pin laterally in original Vespa pistons [...]

  • Price: 

    € 1,32 Discount 5.9%

    €1,24 All prices are inclusive of VAT

Polini piston pin retainer 272.0001, shape A, with two prongs, Ø12x1 mm. Replacement for Polini pistons with compatible groove and pin.

Polini piston pin retainer 272.0001, shape A, with two prongs, Ø12x1 mm. Replacement for Polini pistons with compatible groove and pin.

Item code:
5648
Unit of measurement:
PZ

The Polini 272.0001 piston pin retainer is the A-shaped snap ring designed for pistons designed for a 12 mm piston pin. The variant is [...]

  • Price: 

    € 0,94 Discount 24.7%

    €0,71 All prices are inclusive of VAT

Polini 272.0003 G-type piston pin retainer, Ø15×1,2 mm, one piece for compatible pistons. Verified GTIN 8054705084621.

Polini 272.0003 G-type piston pin retainer, Ø15×1,2 mm, one piece for compatible pistons. Verified GTIN 8054705084621.

Item code:
2790
Unit of measurement:
PZ

The Polini 272.0003 piston pin retainer is a G-shaped snap ring for pistons with a 15 mm piston pin and its compatible seat. The section [...]

  • Price: 

    € 0,94 Discount 24.7%

    €0,71 All prices are inclusive of VAT

Polini 272.0100 16 x 1,2 mm piston pin retainer, GTIN 8054705084638. For pistons compatible with 16 mm piston pin; check the groove.

Polini 272.0100 16 x 1,2 mm piston pin retainer, GTIN 8054705084638. For pistons compatible with 16 mm piston pin; check the groove.

Item code:
5649
Unit of measurement:
PZ

Polini piston pin retainer 16 x 1,2 mm. Snap ring designed to retain the piston pin in the piston. The Polini spare part 272.0100 has a nominal diameter of [...]

  • Price: 

    € 0,94 Discount 24.7%

    €0,71 All prices are inclusive of VAT

VMC 3231 piston pin retainer for 15mm piston pin, single piece, for VMC/Meteor pistons with compatible groove.

VMC 3231 piston pin retainer for 15mm piston pin, single piece, for VMC/Meteor pistons with compatible groove.

Item code:
120118
Unit of measurement:
PZ

The VMC 3231 piston pin retainer is a snap ring designed to retain a 15 mm piston pin in compatible grooves. It is supplied in a single [...]

  • Price: 

    € 5,00 Discount 88.5%

    €0,57 All prices are inclusive of VAT

Piston pin retainer Ø 10mm for original Vespa pistons

Piston pin retainer Ø 10mm for original Vespa pistons

Item code:
120684
Unit of measurement:
PZ

Pin stop 12mm for original vespa pistons

  • Price: Special price visible only to registered customers, log in or call
Ring nut 27842 for rear wheel bearing Vespa 160 GS and 180 SS: internal Ø40 mm, edge 5,2 mm and oil seal 30x40x7 mm. Aftermarket replacement part.

Ring nut 27842 for rear wheel bearing Vespa 160 GS and 180 SS: internal Ø40 mm, edge 5,2 mm and oil seal 30x40x7 mm. Aftermarket replacement part.

Item code:
8936
Unit of measurement:
PZ

The 27842 ring retains the rear wheel bearing on compatible Vespa 160 GS and 180 SS applications. The replacement part integrates the [...]

  • Price: 

    € 11,18 Discount 6%

    €10,50 All prices are inclusive of VAT

46 results found (25 per page - 2 in total)

1 2  

Twitter Google Plus Youtube

 

The products presented on this site are compatible and adaptable to the specified models. In the case of original spare parts / accessories, it is specified in the description of the products that they are original spare parts.

The Vespa and Piaggio brands belong to their respective owners and BARTO SAS has no rights over them.

*** Cookie policyCookie Preferences
ReadyPro ecommerce
^