Float cover carburettor DELL`ORTO by DRT SI 128325-5 for Vespa

Description

Carburetor Floating Cover DELLʻORTO by DRT SI 20.20-26.26, for Vespa 125 TS / 150 Sprint V / Rally / PX80-200 / PE / Lusso / T5 with float needle 5,2mm, for MALOSSI 166 / DR /Pinasco/POLINI 177, standard PX200.
The DELL ʻORTO SI floating lid 20.20H / 24.24H chamber is a special treatment and perfect upgrade for all 20-24 SI carburettors. With its 5,2 mm spiked float it solves the problem of grasping at full capacity.
The DELL ʻORTO floating lid has been revised by DRT and is also intended for all Vespa riders whose hands tend to get nervous on the clutch when riding downhill. It has a larger valve and a 5,2mm floating needle. The 0,7mm hole means enough mix always flows through at full throttle.
On this cover, the feed hole from the bowl to the main jet should be drilled out from 1.5mm to 1,8mm (PX177) or 2,0mm (PX200).

Carburetor floating cover DELLʻORTO by DRT SI 20.20-26.26, for Vespa 125 TS / 150 Sprint V / Rally / PX80-200 / PE / Lusso / T5 with float needle 5,2mm, for MALOSSI 166 / DR / PINASCO / POLINI 177, PX200 standard. The DELL ʻORTO SI floating lid 20.20H / 24.24H chamber is a special treatment and perfect upgrade for all 20-24 SI carburettors. With its 5,2 mm spiked float it solves the problem of grasping at full capacity. The DELL ʻORTO floating lid has been revised by DRT and is also intended for all Vespa riders whose hands tend to get nervous on the clutch when riding downhill. It has a larger valve and a floating needle with 5,2mm. The 0,7mm hole means enough mix always flows through at full throttle. On this lid, the feed hole from the bowl to the main jet should be drilled out 1.5mm to 1,8mm (PX177) or 2,0mm (PX200).