Cover carburetor float DELLʻORTO by DRT SI 20.20-26.26 for Vespa

Description

Cover carburetor float DELL`ORTO by DRT SI 20.20-26.26, for Vespa 125 TS / 150 Sprint V / Rally / PX80-200 / PE / Lusso / T5 with the float needle 5.2mm, for MALOSSI 166 / DR / Pinasco / POLINI 177, PX200 The standard DELL ʻORTO floating cover SI 20.20H / 24.24H room is a special treat and a perfect upgrade for all SI 20-24 carburettors. With its 5.2 mm float needle it solves the problem of grasping at full capacity. The floating cover DELL ʻORTO room that has been revised by DRT is also intended to all vespisti whose hands tend to get nervous on the clutch while driving in highway descent. It has a larger valve and a float needle with 5.2 mm. The hole 0.7 mm means enough mix always flows through at full throttle. On these covers, the supply hole from the tank to the main jet should be drilled out from 1.5mm to 1.8 mm (PX177) or 2.0 mm (PX200). this float chamber cover with needle 5.2 mm float solves the problem of the full-throttle piston seizure. Please drill open the supply hole from 1.5 mm to 1.8 mm (PX177) or 2.0 millimeters (PX200).

Carburetor floating cover DELLʻORTO by DRT SI 20.20-26.26, for Vespa 125 TS / 150 Sprint V / Rally / PX80-200 / PE / Lusso / T5 with float needle 5,2mm, for MALOSSI 166 / DR / PINASCO / POLINI 177, PX200 standard. The DELL ʻORTO SI floating lid 20.20H / 24.24H chamber is a special treatment and perfect upgrade for all 20-24 SI carburettors. With its 5,2 mm spiked float it solves the problem of grasping at full capacity. The DELL ʻORTO floating lid has been revised by DRT and is also intended for all Vespa riders whose hands tend to get nervous on the clutch when riding downhill. It has a larger valve and a floating needle with 5,2mm. The 0,7mm hole means enough mix always flows through at full throttle. On this lid, the feed hole from the bowl to the main jet should be drilled out 1.5mm to 1,8mm (PX177) or 2,0mm (PX200).